Multiple Choice
Identify the
choice that best completes the statement or answers the question.
|
|
|
1.
|
Set the __________ down against the stock before
turning on the power.
a. | saw blade | c. | double chuck | b. | hold down foot | d. | blower |
|
|
|
2.
|
Before you turn on the scroll saw, be sure that
the_________ is properly adjusted to keep the blade from bending or breaking.
a. | upper plunger | c. | blade tension | b. | blade guard | d. | hand wheel |
|
|
|
3.
|
When cutting, do not have ________ directly in line
with the saw blade
a. | blade guard | c. | surplus stock | b. | your hand | d. | safety glasses |
|
|
|
4.
|
You must never try to clean scraps of material near
the ________ with your fingers or hands
a. | blade | c. | on off switch | b. | table | d. | throat plate |
|
|
|
5.
|
If small pieces get caught _________, be sure to
stop the machine before trying to remove them.
a. | behind the table | c. | in the throat | b. | under the switch | d. | behind the arm |
|
|
|
6.
|
. When operating a variable speed scroll saw,
always start the machine at ________
speed setting and adjust
the speed to the working speed before performing the operation
a. | fastest | c. | top | b. | middle | d. | slowest |
|
|
|
7.
|
When a blade breaks you should _______ first
a. | tell the instructor | c. | turn off the power | b. | clear the table | d. | unplug the
machine |
|